| Location: Main >
Optical Crystals Ceramics
> Laser Crystals Ceramics SHG THG Crystals
|
| |
| BBO Crystals for SHG THG |
| P/N: | BBO Series |
| Introduction: | Selection of thin nonlinear BBO crystals cut and coated for second harmonic generation (SHG) of Ti:Sapphire laser wavelength.
Crystals down to 100 µm thickness can be manufactured as free standing crystals (not attached to any kind of support). However, ring mounts are highly recommended for safe handling of these thin crystals. The minimum aperture of free standing BBO is 5x5 mm, maximum - 22x22 mm. The tolerance is ?à50 µm for crystals of thickness down to 300 µm and ?à20 µm for crystals of thickness down to 100 µm. |
|
|
|
|
|
| |
| |
| Nd:YVO4 Laser Crystal |
| P/N: | CTV Series |
| Introduction: | The yttrium orthovanadate (YVO4) is a positive uniaxial crystal grown with Czochralski method. Nd:YVO4 laser crystals are used in all types of solid-state lasers systems-frequency-doubled continuous wave, high-energy Q-switched etc. It has good mechanical and physical properties and is ideal for optical polarizing components because of its wide transparency range and large birefringence. |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| CTV-P-1.0-00300030-0010-HR1064 |
3x3xT1mm,Nd1%atm,Nd:YVO4,Pump@808nm,HR/AR@1064nm |
S$220.00/pc |
In stock |
Add to Request List |
| CTV-P-1.0-00300030-0020-HR1064 |
3x3xT2mm,Nd1%atm,Nd:YVO4,Pump@808nm,HR/AR@1064nm |
S$250.00/pc |
In stock |
Add to Request List |
| CTV-P-1.0-00500050-0010-HR1064 |
5x5xT1mm,Nd1.1%atm,Nd:YVO4,808nm pump,HR/PR@1064nm |
S$370.00/pc |
In stock |
Add to Request List |
| CTV-P-1.0-00300030-0010-M-HR1064 |
Nd1.0%atm 3x3xT1mm Coated Nd:YVO4 (Mounted) |
S$250.00/pc |
In stock |
Add to Request List |
| CTV-P-1.0-00300030-0020-M-HR1064 |
Nd1.0%atm 3x3xT2mm Coated Nd:YVO4(Mounted) |
S$280.00/pc |
In stock |
Add to Request List |
| CTV-P-1.0-00500050-0010-M-HR1064 |
5x5xT1mm,Nd1.1%atm,Nd:YVO4,808nm pump,Chip Laser |
S$400.00/pc |
In stock |
Add to Request List |
| CTV-P-3.0-00300030-0010-HR1064 |
3x3xT1mm,Nd3%atm,Nd:YVO4,pump 808nm,HR/AR@1064nm |
S$220.00/pc |
In stock |
Add to Request List |
|
|
| |
| |
| Nd:YAG Rods/Slabs/Substrates |
| P/N: | CTY Series |
| Introduction: | Nd:YAG(Neodimium Doped Yttrium Aluminum Garnet) laser crystals are used in all types of solid-state lasers systems-frequency-doubled continuous wave, high-energy Q-switched etc. Compared with Nd:YVO4, the fluorescence lifetime of Nd:YAG is twice longer, and the thermal conductivity is also better. |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| CTY-R-1.0-00200020-0200-AR946 |
2x2xL20mm,Nd:YAG,Nd1.0%,DAR@946nm,pump AR@808nm |
S$450.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-B61-AR808-23340300-0150 |
W3.0xT1.5xL20m,Nd1%,Brewster,AR808nm |
S$300.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-B61-AR8081064-23340300-0150 |
W3.0xT1.5xL20m,Nd1%,Brewster,AR808/1064nm |
S$450.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-B61-AR8081064-23340300-0200 |
W3.0xT2.0xL20m,Nd1%,Brewster,AR808/1064nm |
S$370.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-B61-AR8081064-23340300-0300 |
W3.0xT3.0xL20m,Nd1%,Brewster,AR808/1064nm |
S$400.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-B61-AR8081064-22200200-0200 |
W2.0xT2.0xL20m,Nd1%,Brewster,AR808/1064nm |
S$440.00/pc |
In stock |
Add to Request List |
| CTY-R-10-010-0.01-U |
Dia10.0xT1.0mm,Nd:YAG Crystal Nd1%atm,DSP,Uncoated |
S$380.00/pc |
In stock |
Add to Request List |
| CTY-R-1.0-0040-0080-AR808 |
Dia4.0xL8.0mm rod,Nd1%atm,HR1064+HT808nm/AR1064nm |
S$550.00/pc |
In stock |
Add to Request List |
|
|
| |
| |
| Er: Yb: Glass Laser Rods |
| P/N: | ERGR Series |
| Introduction: | Er: Yb: Glass Rods Mainly used for 1540nm eye-safe lasers. |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| ERGR-030-300 |
Dia3.0xL30.0mm,Er:Yb Glass Laser Rod,AR/AR@1540nm |
S$800.00/pc |
In stock |
Add to Request List |
|
|
| |
| |
| Ceramic YAG Rods/Slabs/Plates |
| P/N: | CCY Series |
| Introduction: | PHOTONIK and Baikowski now offer ceramic Nd:YAG through their technical collaboration with Konoshima Chemical Industry of Japan. Ceramic YAG from Konoshima was perfected over the last 15 years and now provides unique advantages over single crystals used by the laser industry.
Advantages of Ceramic YAG
• Fracture toughness: 5 times greater than single crystals
• Hardness: 1.5 times greater than single crystals
• Available size:
- Rods: up to Diameter 10 mm x Length 230 mm
- Slabs: up to Thickness 10 mm x Width 60 mm x Length 230 mm
- Plates: up to Thickness 20 mm x Sides 100 mm
• Up to 4% Nd doping with no gradient
• Unique composite designs
• Low cost in mass production |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| CCY-P-02700230-0050 |
27x23xT0.5mm,YAG,ceramic,undoped,uncoated |
S$1,150.00/pc |
In stock |
Add to Request List |
| CCY-R-0100-010-0.01-U |
Dia10.0xT1.0mm,Ceramic Nd:YAG,1%atm,Un-coated |
S$450.00/pc |
Call us |
Add to Request List |
| CCY-R-0.6%-0040-0050 |
Dia4.0xL5.0mm,Nd:YAG, ceramic,Nd 0.6%atm,uncoated |
S$1,000.00/pc |
Call us |
Add to Request List |
| CCY-R-0.6-0040-0050-AR946 |
Dia4xL5mm Rod,Nd0.6%atm, AR@808/946/1064/1318nm |
S$1,250.00/pc |
In stock |
Add to Request List |
| CCY-R-1.0-0040-0100 |
Dia4xL10mm,Nd:YAG rod,Ceramic,Nd1.0%atm,uncoated |
S$1,000.00/pc |
Call us |
Add to Request List |
| CCY-R-1.0-0040-0100-AR1064 |
Dia4.0xL10.0mm,Rod, Nd1.0%atm,AR@808/1064nm |
S$1,250.00/pc |
In stock |
Add to Request List |
|
|
| |
| |
| KTP Crystal |
| P/N: | KTP Series |
| Introduction: | KTP (KTiOPO4) is a nonlinear optical crystal, which possesses excellent nonlinear, electrooptical and acoustooptical properties. A combination of high nonlinear coefficient, wide transparency range, and broad angular as well as thermal acceptance makes KTP very attractive for different nonlinear optical and wavequide applications.
KTP is a standard crystal with the parameters mostly used in extracavity configuration when the single pass through the crystal is required.
KTP crystals are optimised for SHG intracavity configuration in low peak power CW lasers. Because of large number of passes through the crystal low insertion losses and high homogeneity are essential for crystal efficiency. The special highest quality material selected by SHG efficiency mapping of each crystal, fine surface polishing and dual band AR coatings with very low losses allow PHOTONIK to produce KTP crystals suitable for infracavity SHG application. |
|
|
| P/N |
Keywords |
Unit Price |
Available |
Generate Quotation |
| KTP-UM-0060-030 |
KTP SHG 6.0x6.0xT3.0mm,AR@1064/532nm,Unmounted |
S$650.00/pc |
In stock |
Add to Request List |
| KTP-10M-0060-030 |
KTP SHG,6x6x3mm,Dia25.4 mounted,DAR@1064/532nm |
S$750.00/pc |
In stock |
Add to Request List |
| KTP-UM-0060-050 |
KTP SHG 6.0x6.0xT5.0mm,AR@1064/532nm,Unmounted |
S$750.00/pc |
In stock |
Add to Request List |
| KTP-10M-0060-050 |
KTP SHG,6x6x5mm,Dia25.4 mounted,DAR@1064/532nm |
S$850.00/pc |
In stock |
Add to Request List |
| KTP-10M-0060-060 |
KTP SHG,6x6x6mm,Dia25.4 mounted,AR@1064/532nm |
S$950.00/pc |
In stock |
Add to Request List |
|
|
| |
Optical Substrates
Optical Crystals Ceramics
Laser Crystals Ceramics SHG THG Cry
