Digital Fiber Fusion Splicer-No Classification-No Classification-Singapore Optics Shop

Singapore Optics shop retail laser optics & fiber optical components covering the entire spectrum from UV to FIR.

Home Products News Links Contact

Optical Substrates

Optical Crystals Ceramics

Optical Windows Shadow Masks

Optical Lenses

Optical Mirrors

Optical Prisms

Optical Filters

Optical Beamsplitters

Optical Waveplates

Optical Polarizers

Optical Etalons

Quartz Glasswares Alumina Tube

Optomechanics

Fiber Passive Components

Fiber Optical Attenuators

Fiber Amplifiers

Fiber Frequency Shifter

Fiber Optics Tooling Packaging

Lasers Systems Accessories

Light Sources

Imaging Components

Photodetectors

Photomask Reticle

Optical Power Meters

Optical Modulators Drivers

Instrument Accessories

Optical Grating

Location: Main > No Classification > No Classification > PFS-A10

Name:	Digital Fiber Fusion Splicer
P/N:	PFS-A10
Keywords:	Auto Focus/Align/Detect/Splice under LCD monitor
Unit Price:	S$18,500.00/set
Available:	Call us
Request:	Add to Request List
Introduction:	PKL-300H digital fiber fusion splicer use PAS technology to do core to core alignment. The fiber fusion splicer comes with automatic functions: focuse, detecte, align, splice etc. All the processing on fiber can be monitored by color LCD with clear digital image display.

Features

Core to core alignment by PAS technology

( PAS:Profile Alignment System)

Digital fusion splicer with automatic focus function

Fiber core can be display clearly

Single X or Y view and X & Y view simultaneously

Auto detect cleaved endface fault

Display fiber cleaved and offset angle

Display core and clad offset

5.6 inch TFT color LCD monitor with clear digital image display

USB & VGA interface

Software upgrade via USB interface

Specefications

Model	PKL-300H
Applicable fibers	SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length	8-16mm (Coating diameter: 250um) 16mm (Coating diameter: 250 - 1000um)
Fiber diameter	Cladding diameter: 80 -150um Coating diameter: 100- 1000um
Fiber Count	Single
Fiber aligning method	Core or clad aligning
Image processing method	Digital
Actual average splice loss	0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB( NZDS)
Splicing time	Typical 9 seconds, with standard SM fiber
Splicing mode	53(templet), 40(user)
Splice loss estimate	More accurate
Return loss	>60dB
Storage of splice result	4000 results, 20 parameter per result
Fiber display and magnification	300X (X or Y view), 150X (X and Y view)
Tube heating time	Typical 30 seconds
Tube heating mode	9(templet), 24(user)
Tube heating temperature	Can be adjusted
Applicable Protection sleeve length	60mm, 40mm and a series of micro sleeves
Tension test	2N
Electrode life	2500
No.of splice/heating with battery	Typical 150 cycles (splice/tube heat) with inner Li-battery
Display screen	5.6 TFT inch color LCD monitor
Image change over	The fiber image is turned upside down
Terminals	USB 1.1 and VGA
Operating condition	0 - 5000m above sea level, 0 - 95%RH and -10-50 deg, respectively, Max. wind velocity of 15m/s
Power supply	AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions	150mm(L) x150mm (W) x150mm (H)
Weight	2.7 Kg excluding battery,3.2 Kg including battery

Functions

Model	PKL-300H	PKL-280H
Splicing mode	Auto \ Calibrate Normal \ Special	Auto
Fiber cleaved angle threshold set	0.1 - 10.0 deg 0.1 deg step	0.5 - 8 deg 0.5 deg step
Display fiber cleaved angle	Yes	-
Display fiber offset angle	Yes	-
Auto focusing	Yes	-
Auto aligning	Yes	Yes
Auto detect cleaved endface fault	Yes	-
Display core offset	Yes	-
Display clad offset	Yes	-
Fiber partial core Compensation	Yes	-
Arc strength automatic adjustment	Yes	-
Display inside temperature	Yes	-
Display ambient temperature	Yes	-
Display heater temperature	Yes	-
Display air pressure	Yes	-
Display battery voltage	Yes	-
Taper Splice	Yes	-
Sleep	Yes	-
Auto Shut down	Yes	-
Software upgrade	Yes	-

Configuration


	Copyright @ Singapore Optics Shop, 2006-2013