| Location: Main >
Quartz Glasswares Alumina Tubes > Quartz Tubes Sleeves > QUZT-O-0120-0100-0500
|
|
|
| Name: | OD12/ID10/L500mm Quartz Test Tube(Round Bottom) |
| P/N: | QUZT-O-0120-0100-0500 | | Keywords: | OD:12mm,ID:10mm,L:500mm,Round Bottom |
| Unit Price: |
S$75.00/pc
|
| Available: |
In stock
|
| Request: |
Add to Request List |
| Introduction: | Naturally occurring crystalline (sand) is crushed into powder and passes through numerous purifying processes. The resulting pure powder is fused by either of two different processes to manufacture clear fused quartz ingots.
The fused quartz test tubes are mainly used for heating purpose in chemicals, semi-conductor industry etc. The fused quartz test tubes look transparent after anneal and the working temperature can reach 1200 Deg-C. They can even quench in water when heating to 1200 Deg-C. |
|
|
 |
| Material: |
Fused quartz |
| Configuration: |
One end Open and the other end close with round bottom |
| Outer Diameter(OD): |
12.0,-0.2/+0.1mm |
| Inner Diameter(ID): |
10.0,+/-0.2mm |
| Length: |
500,+/-0.5mm (total) |
| Operation Temperature: |
1200 deg-C |
Physical Properties of Fused Quartz Material
| Density: |
2.2 g/cm2 |
|
Thermal Expansion
Coefficient: |
5.5x10-7cm/cm deg-C |
| Softening Point: |
1690 deg-C |
| Annealing Point: |
1215 deg-C |
| Strain Point: |
1120 deg-C |
| Index of refraction: |
1.4585 |
| Specific Heat: |
670 J/kg |
| Young*s Modulus: |
< 10.5x106 psi |
| Electrical Resistively: |
7x109 ohm.cm @ 350 deg-C |
| Dielectric Constant: |
3.75 @1MHz | |
| |
Optical Substrates
Quartz Glasswares Alumina Tube
Quartz Tubes Sleeves
